erikendswithak Posted March 22, 2013 Report Share Posted March 22, 2013 I cannot successfully add another member to a media set. I select the media set, click members, and click the + button. It adds the LTO tape to the media set, however it doesn't update the space available. The tape is brand new, fresh out of the case. Percentage used is still in red after I add the member. When I go to do a back up it requests more media. When I select the tape under choose media, which has the correct header, it states that the media is already in use by another media set. I have tried 4 brand new tapes and this has happened to each one. OSX 10.7.4 2.4 Quad core, 6GB RAM Retrospect 9.0.2 Quantum ULTRIUM5, TC L52BN connected via ATTO SCSI Quote Link to comment Share on other sites More sharing options...
Lennart_T Posted March 22, 2013 Report Share Posted March 22, 2013 I have never added a new tape to a media set manually. I let Retrospect request a tape first and THEN insert an empty tape. Try forgetting tape 2 and then run a backup. Quote Link to comment Share on other sites More sharing options...
erikendswithak Posted March 23, 2013 Author Report Share Posted March 23, 2013 I have done it several ways. By doing it as I stated earlier, within the backup assistant (Select Media Sets), and when Retrospect asks for a new tape. I always get "this is already in use by another media set." Quote Link to comment Share on other sites More sharing options...
David W Lee Posted March 23, 2013 Report Share Posted March 23, 2013 We have added to the to-do list. Thanks for raising this. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.