mikem1701d Posted June 29, 2004 Report Share Posted June 29, 2004 I have a G4 running 10.3.4 that's connected to a Spectra Logic treefrog library via SCSI. The OS and Retrospect v.5 both see the drive, but only as a single tape drive, not as an autoloader. This system worked fine on 9.2.2 running version 4 of Retrospect. Ideas, anyone? I am running the most current driver settings, but that doesn't seem to be it. Can anyone help? Thanks! Link to comment Share on other sites More sharing options...
natew Posted June 30, 2004 Report Share Posted June 30, 2004 Hi There have been tons of problems with SCSI adapters and OSX. Chances are you are using an adaptec card? This is not supported by Dantz. Please take a look at the following page: http://www.dantz.com/index.php3?SCREEN=kbase&ACTION=KBASE&id=27381 Thanks Nate Link to comment Share on other sites More sharing options...
mikem1701d Posted June 30, 2004 Author Report Share Posted June 30, 2004 Thanks for the info Nate...this was my fear. I am using an Adaptec card, the 2940UW. Looks like we either move to ATTO, or find another solution. Cheers, Mike Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.