jhg Posted June 24, 2004 Report Share Posted June 24, 2004 + Executing Verify at 6/24/2004 10:48 AM To Backup Set ExEmpArchive... Trouble reading: "2-ExEmpArchive" (16080), error -102 (trouble communicating) Trouble reading: "2-ExEmpArchive" (16133), error -102 (trouble communicating) Trouble reading: "2-ExEmpArchive" (0), error -205 (lost access to storage medium) 1,320 files were not verified 6/24/2004 12:36:35 PM: Execution incomplete Remaining: 100954 files, 14.1 GB Completed: 50400 files, 8.3 GB Performance: 434.8 MB/minute Duration: 01:47:54 (01:28:34 idle/loading/preparing) The drive shows up in Retrospect as: Vendor: HL-DT-ST Product: DVDRAM GSA-4082B Revision: A201 Location: USB CD:3 The knowledgebase article refers only to SCSI in relation to this error. Any idea what would cause this on a USB DVD drive? Link to comment Share on other sites More sharing options...
natew Posted June 25, 2004 Report Share Posted June 25, 2004 Hi There are a lot of posibilites. The error indicates that Retrospect lost communication with the disk or the drive. Here are a few things to try: Try disabling any other burning software. Try a different cable or USB port. Try installing ASPI using the ASPIINST.exe utility in the Retrospect folder. Try a different brand/type/speed of media. Thanks Nate Link to comment Share on other sites More sharing options...
jhg Posted June 25, 2004 Author Report Share Posted June 25, 2004 Problem solved - I reduced the write-speed in Retrospect to "Slow" (still about 90MB/min) and reran the same archive job, and the problem went away. The verify ran with no errors, at an average speed of 460 MB/min. Cool! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.