pigtailpat Posted July 23, 2003 Report Share Posted July 23, 2003 I did a full backup using 6.5 and got the following 2 errors (with red arrows under the drive "C" part) as reported in the log: + Retrospect version 6.5.283 Launched at 7/22/2003 1:21 PM + Executing Immediate Backup at 7/22/2003 1:29 PM To Backup Set Backup Set A... - 7/22/2003 1:29:01 PM: Copying Drive C (C:) File "C:\Windows\Temporary Internet Files\Content.IE5\4ZCZKJED\checkin[1].aspx": can't read, error -1101 (file/directory not found) File "C:\Windows\wt\wtupdates\wtisa\wtisa.dat": can't read, error -1101 (file/directory not found) 7/22/2003 4:38:40 PM: Snapshot stored, 31.7 MB 7/22/2003 4:38:47 PM: 2 execution errors Remaining: 2 files, 2 KB Completed: 119550 files, 29.6 GB, with 0% compression Performance: 160.8 MB/minute Duration: 03:09:46 (00:01:09 idle/loading/preparing) - 7/22/2003 4:38:47 PM: Copying Drive D (D:) 7/22/2003 6:12:18 PM: Snapshot stored, 7,827 KB 7/22/2003 6:12:21 PM: Execution completed successfully Completed: 44295 files, 15.9 GB, with 0% compression Performance: 174.8 MB/minute Duration: 01:33:34 (00:00:50 idle/loading/preparing) 7/22/2003 6:12:21 PM: 2 execution errors Total performance: 165.4 MB/minute with 0% compression Total duration: 04:43:21 (00:02:23 idle/loading/preparing) + Executing Prepare for Disaster Recovery at 7/22/2003 6:42 PM From Backup Set Backup Set A, Snapshot Drive C (C:) 7/22/2003 1:29 PM To CD-ROM image file Restore Drive C1.iso... MapError: unknown Windows error 0 7/22/2003 6:44:23 PM: Execution completed successfully I'm aware there is an 3.19 update - this full back up was done before I installed the update. What do the errors mean and should I be concerned? Also, on making a disaster recovery CD, I know I should burn in ISO format, but does it matter if I use the 8.3 file naming structure or the 30 character file structure options under EZ CD? Thanks! Pat Link to comment Share on other sites More sharing options...
natew Posted July 23, 2003 Report Share Posted July 23, 2003 Howdy, The 1101 error can be disregarded in this case -looks like some temporary internet files were deleted during the backup. Error 1101 is well documented in the Dantz Knowledgebase.If you are concerned about them you can always run another normal backup. The Maperror is probably OK to ignore too but just in case you could create a new DR ISO image. You may want to restart the computer and minimize the number of programs you have running when you run the DR creation wizard. As far as burning the ISO, I suggest using the default settings for EZ CD Nate Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.