tarbe1 Posted November 20, 2006 Report Share Posted November 20, 2006 I have purchased an Iomega 320GB Storcentre which came with Retrospect Express. However when I try to create a backup it does not see my Storcentre. It will only see my C drive or my CD ROM drive. My computer sees the Storcentre as drive N: Help please. Link to comment Share on other sites More sharing options...
Mayoff Posted November 20, 2006 Report Share Posted November 20, 2006 You should create a disk backup set, and use the network volume as the destination disk. The NAS will not show up under devices. Link to comment Share on other sites More sharing options...
tarbe1 Posted November 20, 2006 Author Report Share Posted November 20, 2006 There is no network volume as the Iomega software just creates a drive letter on whichever computer you use. Also according to the Retrospect user guide it should show up under devices. Link to comment Share on other sites More sharing options...
Mayoff Posted November 20, 2006 Report Share Posted November 20, 2006 The user's guide does NOT say that network volumes show up under Devices. You may have incorrectly read something. When you get properties on the NAS, what type of device does windows say it is? Local Disk, Removable Disk, Network Disk? Link to comment Share on other sites More sharing options...
tarbe1 Posted November 21, 2006 Author Report Share Posted November 21, 2006 Network drive Link to comment Share on other sites More sharing options...
Mayoff Posted November 21, 2006 Report Share Posted November 21, 2006 Hi, If it shows up as a network drive then you need to follow these steps: http://kb.dantz.com/article.asp?article=1062&p=2 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.