Zaph0d Posted July 16, 2002 Report Share Posted July 16, 2002 I am having an issue trying to get a client to function correctly on an NT 4 server with dual nics and about 200 IP addresses. The client will start fine if I allow it to bing itself to the default 0.0.0.0, however, the server will not recognize it (error -530). So, I bound it to the san 172.16.1.x address. When I started the client again, it tells me "Client networking not available, or service not started." I checked the IP several time, and I have verified the functionality of the NIC. Ther service, as NT reports it, is running, but the client can not tell. I have tried everything from reinstalls to reboots. Any ideas? Link to comment Share on other sites More sharing options...
Zaph0d Posted July 19, 2002 Author Report Share Posted July 19, 2002 No one has ever seen this before? Link to comment Share on other sites More sharing options...
lv2ski Posted July 22, 2002 Report Share Posted July 22, 2002 www.dantz.com/knowledgebase type in 2 nic read the articles that come up. They may be able to help. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.