Jump to content

Restoring to a Network drive

Recommended Posts

I wish to restore from a DLT tape backup to a network drive mounted on my Mac 9.2 Desktop G3. When I try the system allows me to select individual files and to select the mounted network drive but when it actually tries to restore it generates the folder with the catalogues name then sometimes quits giving the following error in the log.

- 1/7/2005 2:35:05 pm: Retrieving from Backup 2005 PT2…

Trouble writing files, error -1410 (unknown).

1/7/2005 2:37:27 pm: 1 execution errors.

Remaining: 1 files, 327 KB

Completed: 0 files, zero KB

Performance: 0.0 MB/minute

Duration: 00:02:22 (00:01:52 idle/loading/preparing)


If I restore to a Firewire drive on the desktop it works every time.


Any ideas



Link to comment
Share on other sites



After restore can you manually copy the restored files over to the network drive?


I suspect this is a problem somewhere in the system. Can you try rebooting with base extensions and running the restore again?




Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...