RogerClarke Posted April 6, 2005 Report Share Posted April 6, 2005 Hi I have just bought and installed Retrospect 7 for Small Business Server (standard). When I try to configure a device using the Configure/Device option I get an empty list with no devices showing at all. Not even the server’s hard disks. I then installed the ASPI drivers and configured Retrospect accordingly, now the dvd-rw drive shows but still no sign of the system hard disks. Is it a known fault for NTpassthru not to work on SBS server 2003? Are there any negatives to using ASPI? I though I better clear this up before I start backing up with Retrospect. Roger Link to comment Share on other sites More sharing options...
natew Posted April 8, 2005 Report Share Posted April 8, 2005 Hi Hard disks are just hard disks. They are not "backup devices" like tape or CD/DVD so Retrospect does not list them. This is the correct behavior. To backup to hard disk create a "disk" backup set. Thanks Nate Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.