hemeboy Posted April 12, 2002 Report Share Posted April 12, 2002 I'm probably confused here - but using (trying to use) Retrospect Desktop 5.0203 with a 30 GB VST firewire drive and OSX, the drive is seen on the local desktop but not as an available storage device. Does that mean I'm hosed? - I thought if Retrospect could identify the drive it was supported. Any ideas? Link to comment Share on other sites More sharing options...
AmyJ Posted April 19, 2002 Report Share Posted April 19, 2002 Retrospect supports all hard drives that are supported by the Operating System. Under OS 9, this includes virtually all hard drives. Retrospect accesses hard drives directly through the operating system. If the drive is mounted on the desktop, Retrospect will be able to access it. A hard drive should never show up in the "Storage Devices" window. This window is reserved for devices such as CD burners, tape drives, Zip drives, etc. For more information and complete instructions on backing up to a hard drive, check out the Dantz tutorials at: http://www.dantz.com/index.php3?SCREEN=tutorials Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.