mikebarnes Posted April 28, 2003 Report Share Posted April 28, 2003 I am running Retrospect workgroup (5.0.238) on our Xserve backing up to a LaCie AIT2 autoloader drive. This has worked without any problems since last November. However now when I select Devices instead of seeing just 1 drive connected I see 16! but I am unable to run any backup. The drive is connected via a ATTO Ultra3 SCSI adaptor. Has anyone any experience of this or any ideas. Thanks Link to comment Share on other sites More sharing options...
AmyJ Posted April 28, 2003 Report Share Posted April 28, 2003 In my experience, this behavior typically indicates a problem with the SCSI card. However, there are many hardware variables involved - each as important as the last. See the following link for OS X SCSI troubleshooting to help isolate the cause of the failure: http://www.dantz.com/index.php3?SCREEN=kbase&ACTION=KBASE&id=27289 Link to comment Share on other sites More sharing options...
mikebarnes Posted April 30, 2003 Author Report Share Posted April 30, 2003 Thanks for the advice, it turned out to be the SCSI terminator on the back of the AIT2 drive. I have replaced this and everything is back to normal. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.