ccaviness Posted January 29, 2003 Report Share Posted January 29, 2003 (crossposting here since this is occuring on an OS X machine for me) I'm having this same issue, though my hardware and OS are different. I'm running Retrospect Server 5.0.238 on Mac OS X Server 10.2.3. Hardware is a Quicksilver Dual 1GHz G4 with 1GB RAM. It has only occurred when the backup server is running, sometime after a completed backup. I'm not sure if immediately following a successful backup or before the next one, or sometime in between. Again, Retrospect Server 5.0.238, Mac OS X Server 10.2.3. I have Retrospect Driver Update 3.1.105 (says the log) installed as well - is this necessary with 5.0.238? Device information: SCSI-A:2 Sony SDX-700C 0103 AIT-3 DC (5.01) SCSI-A:5 Qualstar TLS-4212i 2.18 DLT Library (5.01) When I remove the Driver Update, the (5.01) changes to (1.35). After disabling the update, it crashed again last night while in backup server mode. Is there any further information I can provide? Link to comment Share on other sites More sharing options...
AmyJ Posted January 29, 2003 Report Share Posted January 29, 2003 Thanks - we are currently investigating this assert error. Link to comment Share on other sites More sharing options...
jhinds Posted February 3, 2003 Report Share Posted February 3, 2003 ccaviness Casual Forum Poster Reged: 01/22/03 Posts: 3 Loc: New York, NY elem.c-822 error #19954 - 01/29/03 04:53 PM Edit Reply I'm having a similar problem, although it is occuring before backup and preventing backup from running. OS and Retrospect versions are the same though my tape drive is a LaCie AIT-1 firewire (SONY SDX420-C). Has anyone come up with a fix yet? Quote (crossposting here since this is occuring on an OS X machine for me) I'm having this same issue, though my hardware and OS are different. I'm running Retrospect Server 5.0.238 on Mac OS X Server 10.2.3. Hardware is a Quicksilver Dual 1GHz G4 with 1GB RAM. It has only occurred when the backup server is running, sometime after a completed backup. I'm not sure if immediately following asuccessful backup or before the next one, or sometime in between. Again, Retrospect Server 5.0.238, Mac OS X Server 10.2.3. I have Retrospect Driver Update 3.1.105 (says the log) installed as well - is this necessary with 5.0.238? Device information: SCSI-A:2 Sony SDX-700C 0103 AIT-3 DC (5.01) SCSI-A:5 Qualstar TLS-4212i 2.18 DLT Library (5.01) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.