Jump to content

Trouble with backup of client over network, help?


Recommended Posts

Last night i ran a backup of a win 2000 machine over the network. The backup ran but had 24 errors, most of them are 1020 errors, (sharing violation). I then proceeded to make a disaster recovery CD and when I was prompted to choose a "snapshot" I chose the only one in the set (C:). I then received a message box reading " Sorry, that snapshot cannot start a windows volumn" IS this because the snapshot is missing certain system files that were not copied during the backup? I ran this same scenario on the system that is running Retrospect 6.5, all worked well. What settings do I need to change to make this work? Thanks doh.gif

Link to comment
Share on other sites

Hi

 

It is possible that the 1020 errors happened when trying to get a copy of the Registry. You have Retrospect 6.5 with the disaster recovery option right?

 

What files caused 1020 errors? If you do another backup to get another shapshot do you have the same trouble?

 

Thanks

Nate

Link to comment
Share on other sites

I have tried a another backup, with the same results. below are the files that give the 1020 error. Thanks

this is driving me nuts, and pretty much renders Retrospect useless until it is fixed. mad.gif

 

 

File "\\hmi-test\c\Documents and Settings\PLCAdmin\NTUSER.DAT": can't read, error -1020 (sharing violation)

File "\\hmi-test\c\Documents and Settings\PLCAdmin\NTUSER.DAT.LOG": can't read, error -1020 (sharing violation)

File "\\hmi-test\c\WINNT\system32\config\default": can't read, error -1020 (sharing violation)

File "\\hmi-test\c\WINNT\system32\config\default.LOG": can't read, error -1020 (sharing violation)

File "\\hmi-test\c\WINNT\system32\config\SAM": can't read, error -1020 (sharing violation)

File "\\hmi-test\c\WINNT\system32\config\SAM.LOG": can't read, error -1020 (sharing violation)

File "\\hmi-test\c\WINNT\system32\config\SECURITY": can't read, error -1020 (sharing violation)

File "\\hmi-test\c\WINNT\system32\config\SECURITY.LOG": can't read, error -1020 (sharing violation)

File "\\hmi-test\c\WINNT\system32\config\SYSTEM.ALT": can't read, error -1020 (sharing violation)

File "\\hmi-test\c\WINNT\system32\config\software": can't read, error -1020 (sharing violation)

File "\\hmi-test\c\WINNT\system32\config\software.LOG": can't read, error -1020 (sharing violation)

File "\\hmi-test\c\WINNT\system32\config\system": can't read, error -1020 (sharing violation)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...