rpaege Posted July 8, 2003 Report Share Posted July 8, 2003 We never used to have this problem but it seemed to start happening a couple of driver updates ago. Retrospect will forget which slot it has loaded a tape from and try and eject it to slot one even if there is already a tape there. If i put a tape in slot three with tapes in slots one and two, it will fail to load and then try and eject to slot one. Sometimes, Retro will think there are only three slots. If i put a tape in slots four or five, it may see one but not the other, other times it will forget what tapes are in what slot even while it's still scanning the media. If i only have tapes in slots one and two it seems to work just fine. I have tried restarting from time to time but it doesn't seem to help. Any suggestions? Is there some way i can try some of the older drivers to see if the problem clears up? Adic FastStor DLT 4000 Adaptec 29160 (driver 1.2) OS X 10.2.6 Thank You Robert Paege Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.