brainiac7 Posted April 5, 2003 Report Share Posted April 5, 2003 Hi I'm using Retrospect Desktop 5.0238 on a Quicksilver (dual 800) runnng 10.2.4 (all patches run). I use an EasyScript to back up my OS X Mac via two-sided 9.4 GB DVD-RAM disks (*see device spec below). I chose an alternating disk strategy, 1-Backup Set A and B. I cannot get Retrospect to backup incrementally, spanning disks. The initial backup is usually around 4 GB. Everytime Retrospect executes it asks for a new disk, no matter whether Normal, Recycle, or New Media is selected. Each time Retrospect begins by backing the 4 GB of data, not incremental backup. *LaCie 1394 DVD-RAM+DVD-R Drive DVD-RAM LF-D310 MATSHITA media: Optodisc DVD-RAM 9.4 GB Type 4 Help! Link to comment Share on other sites More sharing options...
brainiac7 Posted April 6, 2003 Author Report Share Posted April 6, 2003 I guess this is the answer: http://www.dantz.com/index.php3?SCREEN=kbase&ACTION=KBASE&id=27801 OK, will keep waiting. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.