FiL Posted September 12, 2002 Report Share Posted September 12, 2002 Hey, I installed retrospect server backup 5.0 and connected the QUALSTAR TLS-2000 series tape library to that machine. It worked fine with Retrospect v. 4.3 New version sees the tape drive (Sony SDT-9000), but says "No Driver" for the tape library. It is in the compatibility list, it was working fine under 4.3. What should I do to make it working under 5? MacOS 9.2 Retrospect Backup Server 5.0 QualStar TLS-2218A Thanks, FiL. Link to comment Share on other sites More sharing options...
AmyJ Posted September 12, 2002 Report Share Posted September 12, 2002 First, try changing the SCSI ID's three ID's apart: The tape mechanism's SCSI address must be set to 0,1,2, or 3, and the loader's address must be three higher, at 3,4,5, or 6, respectively. If this doesn't work, try changing the drive to ID 1, Loader ID 2. Link to comment Share on other sites More sharing options...
FiL Posted September 12, 2002 Author Report Share Posted September 12, 2002 WOW !!! It works now! For some reason it works only with ID 2 and 5. But anyway. Thanks a lot. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.