Retrospect 7.6 : error -116 volume doesn't exist

[nurquhar]

Can anyone explain why I am getting error -116 ???

 

I had retrospect 7.6 running every night on my PC for months without any issues. :content:

 

However my backup NAS drive (WD MyBook 1TB) died due to some fault on the main PCB, the drive is ok. :cryy: It put the drive into a new PlusCom drive enclosure, reformated and NAS is backup up again. :banana:

 

Having lost all my old backups I setup new backup sets on the NAS so that the backup scripts would start new backups on the next run.

 

However I got error "-116 volume doesn't exist" for the first two times my first backup ran. :confused: There does not appear to by any documentation of this error message so I don't know its cause. ???

 

The NAS drive continues to run fine and is not offline after the error occurs.

 

The error seems to occur after a few hours of succesfull running.

 

After three runs the backup finaly commpleted. See log below.

 

Since I have some much even bigger backups (~300GB) schedule for this weekend how many runs will be required I wonder.

 

Run 1 of Backup Script

======================

+ Normal backup using User at 16/07/2009 21:00

To Backup Set NS3 User Backup Set A...

 

- 16/07/2009 21:00:21: Copying User on RaidArray (D:)

17/07/2009 03:22:18: Snapshot stored, 15.1 MB

17/07/2009 03:22:48: Comparing User on RaidArray (D:)

Trouble reading: "NS3 User Backup Set A" (494352), error -116 (volume doesn't exist)

17/07/2009 04:18:58: Execution incomplete

Remaining: 66737 files, 23.5 GB

Completed: 222 files, 2.9 GB, with 27% compression

Performance: 69.5 MB/minute (72.0 copy, 52.5 compare)

Duration: 07:18:36 (00:08:31 idle/loading/preparing)

 

 

 

Run 2 of Backup Script

======================

+ Normal backup using User at 17/07/2009 21:00

To Backup Set NS3 User Backup Set A...

VssWBuildSnapshotSet: StartSnapshotSet failed, winerr -2147212522, error -3042

Can't use Open File Backup option for User on RaidArray (D:), error -3042 (there is already a Snapshot set in progress)

 

- 17/07/2009 21:00:29: Copying User on RaidArray (D:)

17/07/2009 21:33:17: Snapshot stored, 15.1 MB

17/07/2009 21:33:52: Comparing User on RaidArray (D:)

Trouble reading: "NS3 User Backup Set A" (5147094), error -116 (volume doesn't exist)

17/07/2009 21:49:36: Execution incomplete

Remaining: 72 files, 1.7 GB

Completed: 2 files, 899.8 MB, with 37% compression

Performance: 76.6 MB/minute (86.4 copy, 57.6 compare)

Duration: 00:49:06 (00:03:06 idle/loading/preparing)

 

 

Run 3 of Backup Script

======================

+ Normal backup using User at 18/07/2009 06:41

To Backup Set NS3 User Backup Set A...

VssWBuildSnapshotSet: StartSnapshotSet failed, winerr -2147212522, error -3042

Can't use Open File Backup option for User on RaidArray (D:), error -3042 (there is already a Snapshot set in progress)

 

- 18/07/2009 06:41:21: Copying User on RaidArray (D:)

18/07/2009 06:43:02: Snapshot stored, 15.1 MB

18/07/2009 06:43:20: Comparing User on RaidArray (D:)

18/07/2009 06:43:40: Execution completed successfully

Completed: 27 files, 9.9 MB, with 56% compression

Performance: 47.1 MB/minute (98.2 copy, 31.0 compare)

Duration: 00:02:19 (00:01:53 idle/loading/preparing)