mkelley Posted July 14, 2005 Report Share Posted July 14, 2005 I have a Qualstar SAIT library and added an additional drive. The original drive is still listed in retrospect, but the new drive doesn't show up. It appears in the drive's diag, but no where else. Does retrospect support multiple drives under Server 6.0 for OS X? Link to comment Share on other sites More sharing options...
twickland Posted July 14, 2005 Report Share Posted July 14, 2005 Quote: Does retrospect support multiple drives under Server 6.0 for OS X? Yes. Until recently, we used 3 DDS tape drives on a SCSI bus (mostly) happily. Once, when we replaced the host adapter card (switching from Adaptec to ATTO), the new card would only see the first drive on the SCSI chain. This turned out to be due to corrupt firmware on the host adapter, which was solved when the card was repaired by ATTO. Be sure you have installed the latest Retrospect Driver Update for your OS and application versions. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.