Jump to content

justinz

Members
  • Posts

    3
  • Joined

  • Last visited

justinz's Achievements

Newbie

Newbie (1/14)

  • First Post Rare
  • Conversation Starter Rare
  • One Month Later Rare
  • One Year In Rare
  • Week One Done Rare

Recent Badges

0

Reputation

  1. This forum is far too quiet, for the best backup software this side of the equator 🥇 I like the current Retrospect user interface. May we please have a local web server console so we can manage it from another PC on the LAN? I know there's now a cloud-based "Remote Management Console" -- but what we need is a LOCAL web-based management console for an individual backup-server-host, whether it's Retrospect Desktop or a Multi-server, etc. (I know, you have to integrate a web server stack, which is messy...) WHAT I DON'T WANT IS an updated user interface that devotes large swaths of the screen space to WHITE SPACE and MEANINGLESS GRAPHICS. Has anyone else seen what NovaStor did to NovaBackup? They took a tight, concise UI that all fit on one screen, and changed it so that you had to "Step Thru" many screens to execute a task. Seems this is the way of the future -- no word-based menus, must use ICONS! And who needs distinct mouse buttons on laptops. (If it ain't good enough for Apple...) Retrospect developers -- PLEASE don't change the user interface so that we're treated as if we can't read manuals or understand how to setup jobs. I don't want to be asked each setting as question "Please choose your sources [Next]... Please choose your destination [Next]... Do you want to use compression? [Next]... Do you want to verify media? [Next] next, next, next, ... Finish. I don't want to see fonts in 36-point typeface. When I saw the first image below my first thought was: C'MON, REALLY? I don't quite know what to think of the circle design below, but I can say that it's not a table of data. PLEASE GIVE US TABULAR DATA. PLEASE GIVE US A SCREEN WITH ALL OF THE SETTINGS ON IT, Not stepping through a series of screens... Please, don't make this application look like it's meant for stupid people with zero attention span. Please. Don't. I realize that the announcement of Console Preview is now three years old, but it does say that this design will be the "replacement" to the current UI. It seems like no such change has been made yet, based on the online manuals linked to from the latest v18.x release (I'm still on v16), and I hope you find a middle ground to being both more user-friendly (e.g. accessible to a wide customer base) and keeping it tight and concise. </rant> Thanks
  2. I keep telling myself -- "Just get a 12TB hard drive"... But then I come around to thinking that a tape can be removed from the system, so in the event of corruption from virus/malware/ransom then I can rebuild. And about the 1x PCIe part -- I had wanted to keep to an ultra small server that I use for a number of other services... Now, HP lists the EliteDesk 800 G1 USDT mPCIe as 2.0, so 1x should be fine for an LTO5. (I have an MXM graphics card installed, and CPU-Z reports that is running at 3.0; so I imagine that's a separate bus from the mPCIe slot). I realize that LTO5 (280MB/s) is pushing past 1x @ 1.0 speeds, particularly if compression is used, and LTO4 is only a little slower at 240MB/s. This is telling me to abandon the idea of miniPCIe-to-PCIe_1x-to-PCIe SAS controller if mPCIe is not running at least 2.0 (with yet-unknown SAS controller) at 500MB/s per lane. (And hopefully the mPCIe isn't whitelisted as Lenovo's are). On a side note, worth mentioning -- I was able to use PCIe-1x-to-PCI_bridge adapter to configure an old PCI (not express) Adaptec AHA-2930 SCSI card and exercise some old HP DAT 6/40 (DDS3) and DAT 6/72 (DAT4) libraries, under Windows 7 64bit. (This was just a little fun before I scrap these devices... eventually. I have dozens of DDS3 tapes, many new, ... just sayin'). Now as far as a single LTO tape drive (SAS) is concerned... What happens when grooming backups sets on LTO? Does it treat the tape like a filesystem, and it simply deletes data from the files--marks filesystem blocks on the tape medium as freed-up? So if I don't exceed the capacity of a single tape, I can leave one tape in the drive indefinitely, as if I were using a hard drive, but not thrash as disk-i/o access does?... and set the retention/groom policy to keep to the capacity of one tape? ... Or perhaps do minimal tape changes, say a quarterly full or DR-image backup. In reality my data isn't that valuable... just personal files and photos. But we all do so much paperless these days--I don't think anyone can really afford data loss.
  3. This new topic because existing threads are so old... EDIT: I'm changing this post & title because I gained some sensibility about SCSI+DDS, and now am intent on using a SAS LTO-5 tape drive, connected to a PCIe 1x card. Unfortunately my knowledge of SAS is very limited..., I'm looking to buy an ultra-cheap noname SAS card and attach it to an HP Ultrium 3000 tape. Adaptec ASR-6405E is a RAID card, and "Mini SAS SFF-8087 SATA3.0 6Gbps Adapter Card Har X5O1" is ... I don't know what, but if it works, then it's cheap and simple, with just a mini-SAS connector. Of course, not being from a big-blue manufacturer like IBM, LSI, or Adaptec, support for Retrospect may be completely missing. So if a controller has an internal mini SAS port, do I look for a cable: INTERNAL mini-SAS to EXTERNAL mini-SAS?--if my tape drive is external with a SAS connector. Or do I look for a cable INTERNAL mini-SAS to four disk-SAS connectors, and only use one of the legs?--if my drive is internal. I supposed I'll experience a major wake-up call when it come times to actually design a strategy with only a single tape drive. I admit this is just the nerd in me that wants to waste my time doing this. Oh well. ---- Originally I had written: (short version) -- "I'm not sure if I should look for a SCSI controller that's 'known good' or take a chance with a random card that fits my host PC. In this day and age of Win10 (vs back in the early 2000's), are more SCSI cards working due to generic driver modes, or does support need to explicitly exist inside Retrospect software for each brand & series?" .... effectively I had asked if an IBM 5785 PCIe x1 Neo 4p HiPro N11702 SCSI controller (which is possibly an obscure card) would work on Windows 10 for a DDS library. Retrospect support indicated that shouldn't be too worried about the card make/model under Windows10. But now realizing how old and slow DDS3/4 will be, I'm no longer nostalgic for my old HP DDS4 library.
×
×
  • Create New...