VictorLo Posted April 28, 2004 Report Share Posted April 28, 2004 Greetings, We just bought a new Adaptec powerDomain 29160 and a new Tape Drive HP Dat72. Our Retrospect are unable to pick the drive at all please help ssytem - powermac 466mhx 1gb ram scsi card : powerdomain 29160 tape drive : hp storageworks DAT 72 Link to comment Share on other sites More sharing options...
natew Posted April 28, 2004 Report Share Posted April 28, 2004 Hi Are you using OSX 10.3? Adaptec cards will not work properly in OSX 10.3. They are also unsupported by Dantz. If this is OSX 10.2 make sure you have the 1.2 adaptec driver installed. Thanks Nate Link to comment Share on other sites More sharing options...
VictorLo Posted April 28, 2004 Author Report Share Posted April 28, 2004 Will Dantz come out a new Driver for 10.3.3? But the strange thing is that if I were to put in the old Tape StorageHP DAT 40, it did pick it up. Only Storage HP Dat 72 unable to pick up. Link to comment Share on other sites More sharing options...
natew Posted May 21, 2004 Report Share Posted May 21, 2004 Hi Dantz can't supply drivers for SCSI adapters. The manufacturer of the adapter has to do that. Unfortunately Adaptec has not released a new OSX driver since 2002. Your best bet is to go with an Atto card. They have put a ton of time and effort in keeping drivers up to date. Nate Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.