cj8n Posted June 2, 2003 Report Share Posted June 2, 2003 I'm setting up Retrospect to backup to an Xserves internal drives (4x180gb). Three of the drives are stripped together. Any thoughts, advice or problems from others with this setup? Link to comment Share on other sites More sharing options...
AmyJ Posted June 2, 2003 Report Share Posted June 2, 2003 Is this the X Serve RAID? From the description, it appears to be. At this time Dantz has not tested Xserve RAID with Retrospect, and it is not supported. To be notified when the Xserve RAID compatibility status changes, please join our Xserve newsletter at: http://list.dantz.com/mailman/listinfo/xserve Link to comment Share on other sites More sharing options...
cj8n Posted June 2, 2003 Author Report Share Posted June 2, 2003 No, this is not Xserve Raid. I'm only using the 4 built in drives in the 1u enclosure. Link to comment Share on other sites More sharing options...
AmyJ Posted June 2, 2003 Report Share Posted June 2, 2003 Then there should be no problems with your setup. If this is internal SCSI, rather then IDE, make sure you check the OS X supported SCSI card list. http://www.dantz.com/index.php3?SCREEN=kbase&ACTION=KBASE&id=27381 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.