kazeeks Posted November 1, 2005 Report Share Posted November 1, 2005 Upon checking on my nighly backups thismorning, I discovered three of my systems were waiting for me to press 'ok' System 1: "The Catalog file is damaged; use Tools>Repair to fix". Press OK System 2: Device trouble, 212, media erased System 3: Device trouble, 212, media erased When I instruct Retrospect to "Just Log Errors", I expect it to do so. All three of these systems are proceeding to to run the remainder of their nightly scripts, but *this is costing me downtime*, as I must wait for these to finish before I can begin my restores. If I wanted Retrospect to wait for a human to click a button, I would have selected "Run Interactively", or "Stop on Errors". The 212 errors need to be fixed. It must be a bug as it's reproducible and I have it everywhere. See my other thread. My other threads also detail my hardware config. If you say you'll log errors, do so. Don't log just some errors. That's not a professional design. The one system that performed flawlessly? My OS 9 Retro 5 rig. Quote Link to comment Share on other sites More sharing options...
natew Posted November 2, 2005 Report Share Posted November 2, 2005 Hi OS version and Retrospect version please? What backup device do you have? What SCSI card are you using? (if applicable) Thanks Nate Quote Link to comment Share on other sites More sharing options...
kazeeks Posted November 2, 2005 Author Report Share Posted November 2, 2005 Oh the hardware config again. Here goes: I have four production backup systems, all running on dual 500MHz G4's with 1GB RAM and built-in gigabit. Three systems are OS X based, workstation version 10.3.9 build 7W98 Retrospect version 6.0.204, Device Access 1.0.106, Driver Update 6.6.101 ATTO UL3D, Driver 3.2.0, Flash 1.6.6f0 Termination: Auto Selection timeout: 250 Burst rate: 512 Fallback Sync: 20 (10) Disconnect: Enabled Command Queuing: Disabled Sync: Enabled Sync Offset: 62 Sync Rate: 20DT These three are attached to the following: (Qty 2) Sony SDX-700C Version 0102 Driver Sony AIT-3 DC (5.05) (Qty 1) Sony SDX-700C Version 0103 Driver Sony AIT-3 DC (5.05) (Qty 1) Qualstar TLS-46120 Version 1.31 Qualstar Library (5.02) (Qty 2) Qualstar TLS-46120 Version 212k Qualstar Library (5.02) The fileservers run OS X Server 10.3.9 and Retrospect Client 6.0.110 My one OS 9 system starts with the same Mac as above: OS 9.2.2 ATTO UL2D Retrospect 5.0.238 Qualstar TLS-4480 version 1.31 driver DLT Library (1.35) Compaq SDX-700C version 7.0A driver Compaq AIT DC (1.35) Quote Link to comment Share on other sites More sharing options...
natew Posted November 15, 2005 Report Share Posted November 15, 2005 Hi You have Retrospect 6.1.126 + Retrospect update 6.1.1.110 on all machines right? I believe the latest version of the AIT firmware is 204. Have you tried that on any of your systems? Thanks nate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.