cwo4mann Posted June 5, 2002 Report Share Posted June 5, 2002 When back up to a set of 6 CD-R was complete, the log gave numerous messages "Decompression failed due to corrupt input data". This is my initial use of the application on a trial basis. System is WinXP, 512MB RAM, and a 16X CD-R using Maxell CD-R media. I suspect a hardware problem, either the write speed was not throttled down or the CD-R is marginal. Any Ideas? Link to comment Share on other sites More sharing options...
AmyJ Posted June 5, 2002 Report Share Posted June 5, 2002 Can you supply specific information about your CD burner? Go to Configure > Devices > Environment and include vendor, product and version. Link to comment Share on other sites More sharing options...
cwo4mann Posted June 5, 2002 Author Report Share Posted June 5, 2002 NEC NR-7700A CD-RW using MS Driver 7/1/2001 Ver 5.1.2535.0 Link to comment Share on other sites More sharing options...
cwo4mann Posted June 13, 2002 Author Report Share Posted June 13, 2002 I pulled the box apart and retightened all connections, cleaned out both CD drives. I suspect either software problem or an internal CD problem. I don't have another CD-RW on hand but will try a different CD-RW. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.