Don Lee 72 Report post Posted November 1, 2014 What's this about? It looks like debug output that didn't get cleaned up before release. Log for Script: rotate_Users Date: 11/1/2014 + Executing rotate_Users at 11/1/2014 1:02 AM To Backup Set Users_last... - 11/1/2014 1:02:00 AM: Transferring from Users LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 11/1/2014 4:02:29 AM: Execution completed successfully Completed: 523912 files, 144.2 GB Performance: 837.3 MB/minute Duration: 03:00:28 (00:04:11 idle/loading/preparing) - 11/1/2014 4:02:29 AM: Verifying Users_last 11/1/2014 5:08:07 AM: Execution completed successfully Completed: 523912 files, 144.2 GB Performance: 2302.3 MB/minute Duration: 01:05:38 (00:01:30 idle/loading/preparing) 11/1/2014 5:08:18 AM: Script "rotate_Users" completed successfully Share this post Link to post Share on other sites
Don Lee 72 Report post Posted November 1, 2014 Sorry about the formatting. It's the "LmGet: ndex" errors that concern me. The log says that it's OK, otherwise. What's this about? It looks like debug output that didn't get cleaned up before release.Log for Script: rotate_UsersDate: 11/1/2014 + Executing rotate_Users at 11/1/2014 1:02 AM To Backup Set Users_last... - 11/1/2014 1:02:00 AM: Transferring from Users LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 LmGet: ndex = 0 < 1 11/1/2014 4:02:29 AM: Execution completed successfully Completed: 523912 files, 144.2 GB Performance: 837.3 MB/minute Duration: 03:00:28 (00:04:11 idle/loading/preparing) - 11/1/2014 4:02:29 AM: Verifying Users_last 11/1/2014 5:08:07 AM: Execution completed successfully Completed: 523912 files, 144.2 GB Performance: 2302.3 MB/minute Duration: 01:05:38 (00:01:30 idle/loading/preparing) 11/1/2014 5:08:18 AM: Script "rotate_Users" completed successfully Share this post Link to post Share on other sites
Lennart_T 148 Report post Posted November 1, 2014 I get ALMOST the same message in version 9.5 on Windows. + Executing Slow Servers To Tape BS at 2014-10-31 21:00 (Execution unit 1)To Backup Set R09LTO [001]...- 2014-10-31 21:00:17: Transferring from Slow ServersLmGet: ndex = 1LmGet: ndex = 1LmGet: ndex = 1LmGet: ndex = 1LmGet: ndex = 1LmGet: ndex = 1LmGet: ndex = 1LmGet: ndex = 1LmGet: ndex = 1LmGet: ndex = 1LmGet: ndex = 12014-11-01 11:08:32: Execution stopped by operatorRemaining: 15 files, 60,9 GBCompleted: 0 files, zero KBPerformance: 0,0 MB/minuteDuration: 14:04:58 (00:04:31 idle/loading/preparing)2014-11-01 11:08:32: Script "Slow Servers To Tape BS" stopped by operator Share this post Link to post Share on other sites
Mayoff 124 Report post Posted November 3, 2014 This is debug logging that can be ignored. It really does not impact the actual transfer. Share this post Link to post Share on other sites
