Jump to content
Sign in to follow this  
nmetzner

LaCie DVD +/- RW and Retrospect 5.1.177

Recommended Posts

Hello

 

I am still working with MacOS 9.2.2 on a G3 and Retrospect 5.1.177 for Backup, too.

 

To reduce the amount of CD-ROMs for Backups I have bought a LaCie DVD +/- RW DL Porsche Design. It is supplied by FireWire. I know that this drive runs on MacOS 9.2.2 in SL mode only.

 

As this drive is not supported automatecally by Restrospect a manual configuration window appeared and I let it run.

 

Now the LaCie drive is shown by Retrospect as a valid storage device, but

(1) I can use it only for DVDs. CD-ROMs are not supportet, thus I cannot use it for restoring data from CD-ROMs.

(2) Toast 5.2.2 Lite does not recognize the LaCie drive for buring CD or DVD respectively.

(3) I cannot read a CD-ROM, only a DVD will be red.

 

What happend?

How can I solve these problems?

 

Many thanks in advance.

 

Sincerely,

 

Norbert

Share this post


Link to post
Share on other sites

Hi Norbert,

 

1) When you configure Retrospect for a particular media type, it will only work with that media type. In order to have it work with multiple types of media after a custom configuration, you must configure it for all those types of media. When you finish configuration of a disc Retrospect should ask if you want to configure additional types of media. So, you would need to say yes and configure with cd's as well.

 

2) If Retrospect is open while you're trying to use toast you may get a conflict between the two applicatons. Aside from that I can't say, you should seek out support for Toast.

 

3) In Finder? In Retrospect? Be more specific, please.

Share this post


Link to post
Share on other sites

Hello Foster...

 

Many thanks for your reply.

 

With regard to (1)

Oh! Now I found this section in my user manual and it's obvious that I made a mistake. I have to reconfigure Retrospect for CD and DVD at the same time. I will do it this weekend.

 

With regard to (2)

I bought the DVD drive last week thus I thought the hard- and software will fullfill the main tasks. That's wrong. The hardware is delivered with a software that is not supported for a lot of months. Even the support for the professional version of this release is not supported for a lot of months. I have to buy the next release of the professional version to *ask* for technical support. – A very strange subject regarding LaCie *and* Toast! – With the delivered software I cannot burn a DVD that's true at all.

 

With regard to (3)

Now I think that this depends on (1).

 

As said above I will reconfigure Retrospect this weekend. Than I will write you my findings.

 

Sincerely,

 

Norbert

Share this post


Link to post
Share on other sites

Hello Foster...

 

These are my findings.

 

Reconfiguring Retrospect in one step led to:

CD-R success

DVD-R failure

DVD+R success

Thus I can use the LaCie +/- RW DL in the sense I bought it for (backups with Retrospect on CDs *and* DVDs).

 

Reconfiguring Restrospect led to a better performance of Toast 5.2.2 Lite. It works now as I expected, unless

– burning a DVD is shown in the same way as burning a CD,

– burning a DVD-R starts with an error message that doesn't have any effect on the quality of burning a DVD-R.

But these doesn't matter (if you know it).

 

Many thanks for your help because your help has been much more prcise than the user manual in this subject.

 

Sincerely,

 

Norbert

Share this post


Link to post
Share on other sites

Hi Norbert,

 

I'm glad to hear you're having some success with your burner. One more thing I would like to mention: it is advised that you do NOT mix media types in the same backup set. It is possible that doing so could lead to unusable backups.

Share this post


Link to post
Share on other sites

Quote:

One more thing I would like to mention: it is advised that you do NOT mix media types in the same backup set.

 


 

I know it. - To be able to write backups on CDs with the new drive is only to ensure that reading of old backups on CDs is possible. My slogan, "If you can read and write it is more likely to be able to restore."

 

Sincerely,

 

Norbert

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×