jherrick Posted September 25, 2005 Report Share Posted September 25, 2005 I am using Retrospect 5.1 on OS 9.2 G4 incrementally backing up an Xserver G5 w/XRAID with a Sony Storstation LIB-D81 which runs eight 8mm AIT-3 tapes in the robotic library attached to the OS 9.2 G4. Retrospect 5.1 backs up the OSX server just fine, but Retrospect only backs up to 4 of the 8 AIT tapes in the library. How do I get it to backup or to tapes 5 through 8? It sees the tapes when it does a scan of the media. As the tapes fill with data, Retrospect asks for a new tape and eventually only asks for Tapes 1 through 4 to be replaced, not tapes 5 through 8. What is the answer to this? Do I need an update for my Retrospect 5.1 software? Thanks for listening. John in Napa Link to comment Share on other sites More sharing options...
natew Posted September 26, 2005 Report Share Posted September 26, 2005 Hi What happens if you manually move a tape from slot 5 into the tape drive and tell Retrospect to use it? Thanks Nate Link to comment Share on other sites More sharing options...
jherrick Posted September 26, 2005 Author Report Share Posted September 26, 2005 Nate, So put tape 5 into say slot 4? But again you will have to manually point Retrospect 5.1 at that drive slot. So the question is how to make Retrospect to use slots 5 - 8 automatically? Thanks. JH Napa Link to comment Share on other sites More sharing options...
natew Posted September 29, 2005 Report Share Posted September 29, 2005 Hi No - put tape 5 into the drive manually. Will Retrospect use the tape at that point? Can you try booting the backup machine with base extensions + Retrospect? Thanks Nate Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.