dfoster Posted June 2, 2005 Report Share Posted June 2, 2005 I noticed dueing an manual restroe that Retrospect never used more than 50% of the available processor capacity during the matching process. It is a dual processor box and so my first though was that it was just using the one processor. I was surprised to discover that this was not the case. Both processors were being used and the utilisation graphs were almost mirror images - as on prcessors utilisation increase the other dropped and the combined result was always 50% utilisation or less. As this is a dedicated backup server it would be preferable to use the entire available capacity - anyone have any clues? Cheers, Daniel Foster Link to comment Share on other sites More sharing options...
natew Posted June 7, 2005 Report Share Posted June 7, 2005 Hi Retrospect takes what it needs and no more. How much RAM is on the machine? Retrospect may be swapping RAM. Thanks Nate Link to comment Share on other sites More sharing options...
dfoster Posted June 7, 2005 Author Report Share Posted June 7, 2005 Knowing that Retrospect was RAM hungry, the servers have 4GB each and should not be paging too much (our largest catalogue is about 1.5GB) Daniel. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.