Jump to content

davidfsmith

Members
  • Content count

    18
  • Joined

  • Last visited

Community Reputation

0 Neutral

About davidfsmith

  • Rank
    Occasional forum poster
  1. davidfsmith

    Server Move

    *blush* a good case of RTFM I'll get me coat. ;-)
  2. Morning All, I've got a shiny new XServe which is going to replace my less than shiny XServe as my backup server, is there a directory or series of folders I can copy across so I don't have to re-create all the scripts and add in all the network servers ? Regards BN
  3. davidfsmith

    Sony AIT4

    *curse* found the answer, driver update, reboot, job done.... I'll get me coat.
  4. Morning All, I've been supplied with Sony AITe520 devices to work with OSX and Retrospect, Sony shows them as being certified on 6.x (http://sony.storagesupport.com/ait/ISV_report_sdx-900v.htm) however they don't seem to want to play nice, any thoughts ? Regards Dave
  5. davidfsmith

    Linux Client RHEL 4

    Sorry about the delay in posting back, looks like the server name was one letter too long (was using the FQDN as the server name) Was xxxxxxx.xx.xxxxxxxxxxxxxxxxx.xxx (x's to protect the guilty!) So just changed to the first part xxxxxxx and all was good. Also noticed that when I added the server to the backup system when it came to putting in the name the one I wanted (FQDN) was 1 char too long. Thanks for all the help waltr.
  6. davidfsmith

    Linux Client RHEL 4

    By jove the name change might have cracked it.... can't be sure as the backup server is backing up everything else, however another server I have with retrospect installed could see the server, and it was showing as "not logged on" will check once the main backup server has done it's work and post up the result. however for the record I edited the system hostname in /etc/sysconfig/network and changed it using the hostname command to save on the reboot (I also removed retroclient using RPM and re-installed) anyone, fingers crossed all is now good... if so, I owe you beers (or drink of your choice) waltr ;-)
  7. davidfsmith

    Linux Client RHEL 4

    Will have to check tomorrow, the backup server is busy backing up other machines... Thanks for the help so far.
  8. davidfsmith

    Linux Client RHEL 4

    Quote: 'netstat -u -t -a'. # netstat -u -t -a Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:32768 *:* LISTEN tcp 0 0 *:sunrpc *:* LISTEN tcp 0 0 xxxxxxxx.xx.xxxxxx:497 *:* LISTEN tcp 0 0 localhost.localdomain:497 *:* LISTEN tcp 0 0 localhost.localdomain:ipp *:* LISTEN tcp 0 0 localhost.localdomain:smtp *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp 0 960 xxxxxxxx.xx.xxxxxx:ssh ::ffff:192.168.10.111:51436 ESTABLISHED udp 0 0 *:32768 *:* udp 0 0 *:819 *:* udp 0 0 *:sunrpc *:* udp 0 0 *:ipp *:* udp 0 0 xxxxxxxx.xx.xxxxxx:ntp *:* udp 0 0 localhost.localdomain:ntp *:* udp 0 0 *:ntp *:* udp 0 0 *:ntp *:* Quote: two questions though, have you tried to add by ip address? or using the 'Test' button to see if Retrospect can connect that way? this will bypass the UDP, and although that doesn't solve out UDP problem, my thinking is that getting this machine backed up is more of a priority right now. Doesn't work either, it prompts for the password and then comes back with a password error. (even when the password is 1234)
  9. davidfsmith

    Linux Client RHEL 4

    well just in case it helps # netstat Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 xxxxxxx.xx.xxxxxxxxx:ssh ::ffff:192.168.10.82:50881 ESTABLISHED tcp 0 0 xxxxxxx.xx.xxxxxxxxx:ssh ::ffff:192.168.10.82:50833 ESTABLISHED Active UNIX domain sockets (w/o servers) Proto RefCnt Flags Type State I-Node Path unix 2 [ ] DGRAM 6137 @/var/run/hal/hotplug_socket unix 2 [ ] DGRAM 3192 @udevd unix 12 [ ] DGRAM 5069 /dev/log unix 2 [ ] DGRAM 9473 unix 3 [ ] STREAM CONNECTED 9348 unix 3 [ ] STREAM CONNECTED 9347 unix 3 [ ] STREAM CONNECTED 7435 unix 3 [ ] STREAM CONNECTED 7434 unix 2 [ ] DGRAM 6232 unix 3 [ ] STREAM CONNECTED 6136 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 6135 unix 3 [ ] STREAM CONNECTED 6116 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 6115 unix 2 [ ] DGRAM 6024 unix 3 [ ] STREAM CONNECTED 6008 unix 3 [ ] STREAM CONNECTED 6007 unix 2 [ ] DGRAM 5893 unix 2 [ ] DGRAM 5874 unix 2 [ ] DGRAM 5859 unix 2 [ ] DGRAM 5840 unix 2 [ ] DGRAM 5667 unix 2 [ ] DGRAM 5584 unix 3 [ ] STREAM CONNECTED 5280 unix 3 [ ] STREAM CONNECTED 5279 unix 2 [ ] DGRAM 5150 unix 2 [ ] DGRAM 5077
  10. davidfsmith

    Linux Client RHEL 4

    From an external machine only TCP is reporting back # nmap -sT -P0 192.168.10.18 PORT STATE SERVICE 22/tcp open ssh 111/tcp open rpcbind 497/tcp open dantz # nmap -sU 192.168.10.18 PORT STATE SERVICE 111/udp open rpcbind 123/udp open ntp 137/udp open netbios-ns 138/udp open netbios-dgm 631/udp open unknown 753/udp open rrh 32768/udp open omad
  11. davidfsmith

    Linux Client RHEL 4

    Ok port scan results are that 497 is open for business for TCP but not UDP (this is the same on one of my other servers where the backup works) # nmap -sT 127.0.0.1 PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 111/tcp open rpcbind 497/tcp open dantz 631/tcp open ipp # nmap -sU 127.0.0.1 PORT STATE SERVICE 111/udp open|filtered rpcbind 123/udp open|filtered ntp 631/udp open|filtered unknown 802/udp open|filtered unknown 32768/udp open|filtered omad I bound the client to IP as from going through some of the posts here that was a suggested solution, although it seems to have made no difference in this instance, also I killed the client this morning and then restarted as below: # /etc/init.d/rcl start # /usr/local/dantz/client/retrocpl 1155194482: pmcWriteData: send() failed with error 88 DoStatus: PmcGetStatus(1) failed with error 519 # /etc/init.d/rcl stop 1155204322: pmcWriteData: send() failed with error 88 DoStatus: PmcGetStatus(1) failed with error 519
  12. davidfsmith

    Linux Client RHEL 4

    Will do a scan when I'm back in the office tomorrow, any particular options you'd like me to run the scan with ?
  13. davidfsmith

    Linux Client RHEL 4

    Had the password as 1234 and it still didn't play nice
  14. davidfsmith

    Linux Client RHEL 4

    Any one else got any thoughts as to woney this install of the retrospect client doesn't want to work ?
  15. davidfsmith

    Linux Client RHEL 4

    RHEL ES (as with the other servers) All updated
×