qperkins Posted April 14, 2008 Report Share Posted April 14, 2008 (edited) We back up to a Mac OS X Server box (10.4.11). We are running Retrospect 6.1.138. We had a CentOS Linux server that died. I am trying to restore. I installed a copy of CentOS 4.5 from the same CD we used originally. I turned off the firewall. It has the same IP as before. I have installed all three Red Had clients (6.5, 7, 7.5) over and over with the exact same results. When I try to add the client to the Mac, it gives me a 507, password incorrect error. Now I have reinstalled at least 6 times and I know damn good and well that I am using the right password. This is the same Mac and the same network configuration we were using before. Any thoughts? I put in the IP, it asks for the password, asks to confirm the name (which is truncated because the hosts name is agentstudio.battlecreektechnologies.com and is apparently too long), after I confirm the name, it says the password is incorrect. I'm fairly sure this was the name of the box before, and is truly the host name of the machine. Another thing to note (although this is how it has been for a year), the backup server is on the internal network (192.168.x) and the server in question is on a public IP. Again, this is exactly how it was at the end of last week when it died. I have 60 users without mail, calendars and websites who are ready to hang me. Timely help would be very much appreciated... - Quinn Perkins, Colorado Edited April 14, 2008 by Guest Quote Link to comment Share on other sites More sharing options...
Mayoff Posted April 14, 2008 Report Share Posted April 14, 2008 Sorry, I don't know much about Linux. I must admin, I don't know anything about CentOS. Is it a type of RedHat? We have never tested or supported CentOS as a client. The list of supported linux version is at : http://kb.dantz.com/article.asp?article=5566&p=2 It could be Retrospect is having a hard time with the password you are using. Try a simple password like "12345". If you use non alphanumeric characters, Retrospect may have a hard time. Quote Link to comment Share on other sites More sharing options...
qperkins Posted April 14, 2008 Author Report Share Posted April 14, 2008 (edited) CentOS and Red Hat Enterprise are more or less the same thing. CentOS is the 'free' and opensource version of their commercial enterprise software. I don't think that is the problem. This is the same software we had running for a while with the Retrospect client. I've changed up the password. It is all alphanumeric with no weird characters or spaces. Edited April 14, 2008 by Guest Quote Link to comment Share on other sites More sharing options...
Mayoff Posted April 14, 2008 Report Share Posted April 14, 2008 (edited) For urgent you should call support directly. http://www.emcinsignia.com/contactsupport Edited April 15, 2008 by Guest fixed URL Quote Link to comment Share on other sites More sharing options...
qperkins Posted April 15, 2008 Author Report Share Posted April 15, 2008 Ok, posting here in case it helps someone else. The problem was our hostname was too long (it was agentstudio.battlecreektechnologies.com) It had NOTHING to do with the wrong password, even though that was the error thrown. I changed the hostname to just agentstudio (in /etc/sysconfig/network) and rebooted and tried it again. Worked like a charm. Quote Link to comment Share on other sites More sharing options...
Mayoff Posted April 15, 2008 Report Share Posted April 15, 2008 Thank you for the very helpful info. I had not seen this before. Quote Link to comment Share on other sites More sharing options...
mauricev Posted May 7, 2008 Report Share Posted May 7, 2008 Any thoughts? I put in the IP, it asks for the password, asks to confirm the name (which is truncated because the hosts name is agentstudio.battlecreektechnologies.com and is apparently too long), after I confirm the name, it says the password is incorrect. Hmm, various strings on old Macintosh software had defined length limits, often 31 characters. It's possible that Retrospect on the Mac still has a few leftover variable definitions. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.